OPTIONS
323-xxM40: Extended Operating Temp. Range

ACCESSORIES
618: Adapter, BNC to Single Binding Post
800A: Rack Mount Kit, Mounts 1 or 2 Units
89-10228-1: Half Rack Cover for 800A

Micropotentiometers
1251- XX: 4.7, 6.8, Terminating Resistors, Reduced Correction Factors: 1.0, 1.28, 1.5, 2.2, 2.8, 3.3, 10, 15, 20, 22W ±30 Specify XX .in Resistance When Ordering

1351- XX: Thermoelement Housing For 1250 Series Resistor: 5 mA, 10 mA, 15 mA, 25 mA, 50 mA, 100 mA, Specify XX in Current When Ordering

OPTIONS
-09: Additional Test Data, at 700 & 900 MHz, 1251- XX Only
-10: ±0.005% DC Reversal Error, 1351-05 Only
-12: 3 pin military connector

ACCESSORIES
51-10073-1: Storage Case for µPots

Thermal Voltage Converters
1385-.04: PCB Mountable version of 1395B-0.4
1385-1: PCB Mountable Version of 1395B-1
1385-3: PCB Mountable Version of 1395B-3

1394A-0.25: .125-.25V, 10 MHz, 200W/V, .04% DC Rev. Err.
1394A-0.5: .25-.5 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-1: .5-1 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-2: 1-2 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-3: 1.5-3 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-5: 2.5-5 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-10: 5-10 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-20: 10-20 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394A-50: 20-50 V, 100 MHz, 200 W/V, .04% DC Rev. Err.
1394N-K10: Special Kit designed for the Navy Use consisting of 1394N-.25, -1.4, -3.3, -5.2,-10.4, 89-11655-1A & Case
Call Factory for other Kits.

1395B-0.4: .2-.4 V, 100 MHz, 50 W, .04% DC Rev. Err.
1395B-1: .4-1 V, 100 MHz, 50 W, .04% DC Rev. Err.
1395B-3: 1-3 V, 100 MHz, 50 W, .04% DC Rev. Err.
1395B-6: 3-6 V, 100 MHz, 50 W, .04% DC Rev. Err.
1395B-1M75: .5-1 V, 100 MHz, 75W, .04% DC Rev. Err.
1395B-1M93: .5-1 V, 100 MHz, 93 W, .04% DC Rev. Err.
1395B-1M135: .5-1 V, 50 MHz, 135W, .04% DC Rev. Err., Balanced
1395B-1M150: .5-1 V, 50 MHz, 150 W, .04% DC Rev. Err., Balanced
1395B-3M600: 1-3 V, 50 MHz, 600 W, .04% DC Rev. Err., Balanced
1395B-K01: Kit Containing 1395A-1, -1M75, -1M135, -1M150, -3M600 & 89-11173-1A
1395B-M103: Kit Containing 1395A-0.4-09, -1-09, -3-09, -6-09, 12257A & 89-11172-1A

1396A-1: .4-1 V, 1 GHz, 50W, .04% DC Rev. Err., Type N Output
1396A-2.4: 1-3 V, 1 GHz, 50W, .04% DC Rev. Err., Type N Output
1396A-7: 3-7 V, 1 GHz, 50W, .04% DC Rev. Err., Type N Output

1398A-M90: .5-1000 V Kit of TVC’s & Precision Resistors

1399-2.5: 1-2.5 V,100 MHz, 200 W/V, .005% DC Rev. Err., 20 ppm, Type N Output
1399-5: 2-5 V, 100 MHz, 200 W/V, .005% DC Rev. Err., 20 ppm, Type N Output
1399-10: 4-10 V, 100 MHz, 200 W/V, .005% DC Rev. Err., 20 ppm, Type N Output

OPTIONS
-08: Add. Test Data, 30,& 50 MHz, Balanced Units Only (1395 Only)
-09: Add. Test Data, 30, 50, 70 & 100 MHz, 50 W Units Only (1395 Only)
-10: ±0.005% DC Reversal Error (Excluding 1399 Series, 1394A-0.25 and 1394N-0.25)
-11: 2 Pin Output Connector (1394 Series Only)

TVC ACCESSORIES
12257A: Low Noise Cable with 3 Pin MS Connector
13940A: Storage Case for 4 TVC’s (1394 & 1399)
13941A: Accessory Kit for 1394/5/6 Series Contains: 10186A,12620A, 12249D, 12257A
13960A: Storage Case for 1 TVC (1396 Series)
89-11172-1: Storage Case for 4 TVC’s (1395 Unbalanced Only)
89-11173-1: Storage Case for 5 TVC’s (1395’s, 3 Balanced & 2 Unbalanced)
89-11655-1: Low Noise Cable with 2 Pin MS Connector

Thermal Transfer Standards
1605B: Programmable, 225 mV to 1100 V; ±DC, 10 Hz to 100 MHz with IEEE-488 and 16056A

ACCESSORIES
16054A: Maintenance Kit, includes 1 each of 12-01068-0, 12617A, 12691A, 12694A, 16058A, 88-10180-1, 88-10181-1, 88-10182-1 and 89-11698-1
16056A: 5-Port Precision Tee, Type- N Connectors
16056A-GR: 5-Port Precision Tee, GR874 Connectors
16058A: DP DT DC/DC Transfer Switch
69-10030-0: Rack Slides

Transconductance Amplifiers
1620A: AC-DC, 200 µA to 100 A, 200 Amps Pulsed

OPTIONS
-60: IEEE-488 Interface

ACCESSORIES
16251A: Cable 60 cm DIN/GR874
16252: Cable 60 cm DIN/Type N

True RMS RF Millivoltmeters
3440A: 10 kHz to 1.2 GHz with 4340A, 6340A, 34402A
3440A-M111: 3440A with 34401A Kit
3440A-M113: 3440A-M111, Sub. Probe 34403A

OPTIONS
-05: Rechargeable Internal Battery
-40: Substitute Hi Precision Probe 34403A
-41: Substitute Low Frequency Probe 34404A

ACCESSORIES
1340A: 100:1 Capacitive Divider for Probe
2340A: Non-Loading Probe Adapter for N & BNC
4340A: Probe Adapter, Probe Tip
5340A: Tee-Adapter, Use w/50 W Coax, Type N
6340A: 50 W Terminating Adapter, BNC & Type N
31-10189-1: 50 W Precision N Term. Use with 5340A
34401A Kit: Containing 1340A, 2340A, 5340A, 31-10189-1 and 89-11103-1
34402A: Standard Probe, 10 kHz to 1.2 GHz
34403A: High Precision Probe, 10 kHz to 1.2 GHz
34404A: Low Frequency Probe, 10 Hz to 100 MHz
89-11103-1: 7" Storage Case for Accessories

Micro-Ohmmeters
3205B: 4 1/2 Digit Display 20 mW to 2000 W, 1 µW Resolution

OPTIONS
-05: Rechargeable Internal Battery

ACCESSORIES
85-60196-0: Test Leads, Kelvin Clips

Oscilloscope Calibrators
6127B: Programmable with IEEE-488 (Requires additional selection of appropriate Head)

HEADS
For 500 MHz Scopes
61252A: Fast Rise Pulser, for Scopes 1 to 500 MHz
61288: Low Frequency Head, Req'd for 500 MHz and below

For 1 GHz Scopes
61271C: Fast Rise Head, for Scopes 1 MHz to 1 GHz
61274A: Direct Output Cable, Req’d for 1 GHz Operation

ACCESSORIES
10650A: Capacitance Standardizer for Oscilloscopes
61272C: Amplitude Comparator Head
61277A: Kit Containing 12619A, 12621A (2), 12630A (2), 12680A (2), 12681A, 12682A, 12683A, 12684A, 12685A, 12686A, 12687A, 12688A, 12689A, 12690A, and 89-11698-1
89-10753-1: Rack Slide Kit
89-11175-1: Protective Front Cover. Storage for two Heads and 61274A
89-11176-1: Protective Rear Cover. Storage for Power Cord

Calibration Systems/Software
4003H: Oscilloscope Calibration System: 486 CPU, 4 MB RAM, 250 MB HD min., VGA Monitor, Dot Matrix Printer, 6127B Oscilloscope Calibrator, 61271C Fast Rise Head for Scopes 1 MHz to 1 GHz, 61274A Direct Output Cable, 40031H Software, IEEE-488 Card, Cables and Manuals

40031H: Oscilloscope Calibration Software DOS Verison

SCOPE-CAL: Oscilloscope Calibration Software, Windows version

40521H: Meter Calibration Software Only. For use with your calibrators. Optional Use of 1605B to Certify 7 1/2 and 8 1/2 Digit Precision Multimeters

4060H: ACV Source Calibration System: 486 CPU, 4 MB RAM, 250 MB HD min., VGA Monitor, Dot Matrix Printer, 1605B Thermal Transfer Standard, 40601H Software, IEEE-488 Card, Cables and Manuals

40601H: ACV Source Calibration Software Only

ACCESSORIES
85-10204-0: IEEE-488 PC Controller Card
88-10108-0: Cable, IEEE-488, 1m
88-10136-0: Cable, IEEE-488, 2m

General Accessories for Ballantine Products

2342: General Purpose 4-pole Butterworth Filter, High-Pass, Low-Pass, Band-Pass, and Band Reject Response, 24 dB/octave Rolloff per Channel, -3 dB at Fc

2362: General Purpose 6-pole Butterworth Filter, High-Pass, Low-Pass, Band-Pass, and Band Reject Response, 36 dB/octave Rolloff per Channel, -3 dB at Fc

2382: General Purpose 8-pole Butterworth Filter, High-Pass, Low-Pass, Band-Pass, and Band Reject Response, 48 dB/octave Rolloff per Channel, -3 dB at Fc

2582: 8-pole Dual Low Pass Bessel Filter, 48 dB/octave Rolloff per Channel, -3 dB at Fc

2762: 6-pole/6-zero Dual Low Pass Anti-Aliasing Elliptic Filter, 0.1 dB Ripple, 94 dB/octave Rolloff, 60 dB Rejection at 1.56 Fc

2763: 6-pole/6-zero High pass/Low Pass Elliptic Filter for Band-Pass or Band Reject Applications, 0.1 dB Ripple, 94 dB/octave Rolloff, 60 dB Rejection at 0.64 Fch and 1.56 Fcl

2782: 8-pole/8-zero Dual Low Pass Anti-Aliasing Elliptic Filter, 0.1 dB Ripple, 140 dB/octave Rolloff, 90 dB Rejection at 1.56 Fc

2783: 8-pole/8-zero High Pass/Low Pass Elliptic Filter, Band-Pass and Band Reject, 0.1 dB Ripple, 140 dB/octave rolloff, 90 dB Rejection at 0.64 Fch and 1.56 Fcl